Auerswald 2500 Benutzerhandbuch

Introduction

First Use of the Telephone

 first.

To be able to use the here described scope of functions completely, the system telephone
and the PBX need the following firmware versions:
3.3 A or higher (system telephone)
1.5 C or higher (COMmander Business and COMmander Basic.2)
2.0 A or higher (COMpact 5010 VoIP and COMpact 5020 VoIP)
2.0 E or higher (COMpact 2204 USB, COMpact 2206 USB, COMpact 4406 DSL, COMpact
4410 USB and COMmander Basic).
The versions can be reviewed via system telephone (see 

Connect the receiver as follows:

1.

Insert the plug at the longer
straight end of the spiral cord
into the jack marked with the

 on the bottom side of the

telephone and lead the cable
via one of the cable channels to
the outside (

2.

Put the other end of the spiral
cord into the jack of the
receiver.

Connect the telephone to the PBX as follows: 

1.

Put one plug of the enclosed ISDN cable into the jack marked with 

 on the bottom

side of the telephone and lead the cable via one of the available cable channels to the
outside (

2.

Put the other jack of the ISDN cable into an ISDN wall jack connected to the PBX system.
The system telephone can be operated on an internal S

0

 port as well as on an U

P0

 port

of the PBX. For each U

P0

 port only one telephone can be connected (see also manual of

the PBX).

☞