Auerswald 2500 Benutzerhandbuch
Service Functions
Remote Programming
186
Remote Programming
If you like to have the settings of the system telephone changed by your authorized dealer at
a later time, it will not be necessary for a service technician to come to your house. The func-
tion remote programming enables the service technician with the corresponding devices dur-
ing an external telephone connection to read or programme the data of the PBX or the tele-
phone. He needs your authorization of course. That means only if you have released it by
dialling certain digits (release of the PBX), the service technician can make the remote pro-
gramming once.
a later time, it will not be necessary for a service technician to come to your house. The func-
tion remote programming enables the service technician with the corresponding devices dur-
ing an external telephone connection to read or programme the data of the PBX or the tele-
phone. He needs your authorization of course. That means only if you have released it by
dialling certain digits (release of the PBX), the service technician can make the remote pro-
gramming once.
Sequence of the Remote Programming for the Service Technician
The necessary hardware is a PC connected with a COMfortel 2500 on an internal S
0
port of
your PBX or alternatively an ISDN PC-controller operated on an internal S
0
port or on the
public telephone network. The necessary software consists of the configuration software
COMfortel Set and the CAPI 2.0 driver for the system telephone or ISDN PC-controller.
COMfortel Set and the CAPI 2.0 driver for the system telephone or ISDN PC-controller.
After the release of the customer’s PBX you can read out the configuration with the configu-
ration programme COMfortel Set or reprogram it. Select the “Interface” “ISDN PC-controller
(CAPI 2.0)” in the menu under “Options”. Start with pressing the button “open” or “save”,
then press the key “Telephone”, enter the external telephone number of the customer’s PBX
ration programme COMfortel Set or reprogram it. Select the “Interface” “ISDN PC-controller
(CAPI 2.0)” in the menu under “Options”. Start with pressing the button “open” or “save”,
then press the key “Telephone”, enter the external telephone number of the customer’s PBX
Use the and softkeys to browse to the
option you require:
option you require:
앫
interface: Shows if the telephone was con-
nected to the PBX via U
nected to the PBX via U
P0
or S
0
.
앫
headset: Shows which headset type has
been selected (
been selected (
) and if the headset
operation is active (
).
앫
hardware: Shows how many Xtension30
modules the telephone are connected.
modules the telephone are connected.
앫
Call charge most recent call: Shows the
call charges accrued for the most recent call.
call charges accrued for the most recent call.
앫
Call charge total: Shows the call charge
sum accrued since the last deletion.
sum accrued since the last deletion.
앫
Charge allowance: Shows the current
charge status of the charge allowance
account.
charge status of the charge allowance
account.
앫
Serial number: Shows the serial number of
the telephone.
the telephone.
앫
and
앫
TAM quick access: Shows the configured
quick access numbers (
quick access numbers (
앫
SD card: Shows the available memory on
the SD card.
the SD card.