Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Auerswald
  4. 2500
  5. Benutzerhandbuch

Auerswald 2500 Benutzerhandbuch

Download
Seite von 236
Configure and use the Answering Machine
Call Recording
207
Use Function via Key:
By pressing the key the automatic call recording is switched on, off or over. 
LED Signalling next to the Key:
To inform the call partner about the recording, you can switch on the info tone (
).
Recordings shorter than 1 second will be deleted by the telephone.
For each call a WAV file is stored on the SD card. The WAV files can be transferred from the
SD card to a PC (see 
). The recordings are collected in the answering machine list
and can be played via the message key (see 
).
Call Recording
Besides of the automatic call recording a manually controlled call recording is possible. This
works independently of the automatic call recording. The calls can also be recorded partially.
Assign Key:
Use Function via Key (only during a call):
By pressing the key during a call the call recording is switched on, off or over.
LED Signalling next to the Key:
red
The automatic call recording is switched on.
red (flashes) The current call is recorded. 
(The signalization is only done here if the automatic call recording is switched
on but not after the manual activation of the call recording during the call.) 
off
The automatic call recording is switched off.
☞
Advice
Open the key programming menu for the func-
tion “TAM call recording” (You will find help on
 and the following).
define keys
function key ...
... level
TAM call record.
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the  softkey in front of the corresponding
selection once or several times (You will find
help on 
 and the following):
앫
[switching type]: Enables the assignment
with switch on, off or over.
Press the 
 softkey to complete the settings.
red (flashes) The current call is recorded.