Harman Stove Company P35I Benutzerhandbuch

Seite von 48
4
Pellets or Corn/Pellet Mixture Only                                           3-90-775                                                                           Save These Instructions
                         P35i Fireplace Insert
Hopper Capacity-
#1-70-774235 (23½ ")
1
 
Listing and Code Approvals
A.  Appliance Certification
 Model:               P35i Insert
 Laboratory:       OMNI-Test Laboratories, Inc.
 Report No.        135-S-25-6.2
 Type:   
   Solid Fuel Room Heater / Fireplace
 
 
   Insert.
 Standard(s):      ASTM E1509-04, ULC S628-93 and    
                          ULC/ORD C1482-M1990 
This appliance is also approved for installation in 
a shop.
B.  Mobile Home Approved
This appliance is approved for Installation in mobile/
manufactured homes. The structural integrity of the 
mobile home floor, ceiling and walls must be main-
tained. The appliance must be properly grounded to 
the frame of the mobile home, and must never be 
installed in a room designated for sleeping. The unit 
must have provisions for an outside air source when 
installed in a mobile home.
C.  Glass Specifications
D.  Electrical Rating
This appliance is equipped with 5mm ceramic glass. 
Replace glass only with 5mm ceramic glass.  Please 
contact your dealer for replacement glass if needed.
115 VAC, 60 Hz, 
3.6 Amps (Start-up); avg. 1.5 Amps (Normal Run)
E.  BTU & Efficiency Specifications
Particulate Emissions 
Rating: 
*BTU Input:
Heating Capacity:
Hopper Capacity- 
#1-70-774195 (19½ ")
Fuel:
Shipping Weight:
41 lbs.
Wood pellets / Corn†
289 lbs.
1,500 sq. ft. 
0 or 6,000 - 35,000 / hr
Exempt from EPA per 
40 CFR, Method 28A
* BTU input will vary, depending on the type of 
fuel you use in your stove.  Moisture and ash 
content can affect performance.
† Corn is approved for burning only when mixed 
with wood pellets.
62 lbs.