Harman Stove Company P35I Benutzerhandbuch

8

Pellets or Corn/Pellet Mixture Only                                           3-90-775                                                                           Save These Instructions

1.   

Place the appliance in a location near the

 

final installation and follow the procedures

 

below:

2. 

Open the appliance and remove all articles

 

packed inside. Inspect all items for shipping

 

damage. Notify dealer of any missing or

 

damaged goods.

3. 

All safety warnings have been read and 

 

followed precisely.

4. 

This Owner's Manual has been read in it's

 

entirety.

5. 

Floor protection requirements have been

 

read and followed.

6. 

The flue connector has been installed in 

 

accordance with the instructions herein.

7. 

The proper clearances from the appliance 

 

and chimney connector to combustibles

 

have been met.

8. 

The masonry chimney has been cleaned

 

and inspected by a professional, or the 

 

factory built metal chimney is installed

 

according to the manufacturers instructions.

9. 

The chimney meets the minimum height

 

requirements.

10. 

All labels and hang tags have been removed

 

from the glass.

11. 

All plated surfaces have been wiped clean,

 

if applicable.

12. 

The room sensor and any additional cable

 

has been installed properly.

13. 

A properly grounded electrical receptacle is 

 

available within reach of the unit's power

 

cord.

14. 

A good quality surge protector is highly 

 

recommended to protect the electronics.

Inspect appliance and components for 

damage. Damaged parts may impair safe 

operation.

•  Do NOT install damaged components.

•  Do NOT install incomplete components.

•  Do NOT install substitute components.

Report damaged parts to dealer.

Hearth & Home Technologies 

disclaims any responsibility for, and 

the warranty will be voided by, the 

following actions:

•  Installation and use of any damaged appliance.

•  Modification of the appliance.

•  Installation other than as instructed by Hearth & 

Home Technologies.

•  Installation of substitute materials or replacement 

parts not approved by Hearth & Home Technologies

•  Operating appliance without fully assembling all 

components. 

•  Do NOT Overfire.