Dimplex 7207250100R05 Benutzerhandbuch

8  

www.dimplex.com

To access the controls, swing 

down the front cover panel 

located on the lower front of the 

fireplace. 

(Figure 3)

Switch
the switch has two on positions 

marked with   and “

Manual”.  

the “

Manual“ position is for 

manual operation. In this position 

the built-in remote control is by-

passed.
the   position is for operating 

the unit with the provided remote 

control.
When in   position, the unit is 

operated with the ON and OFF 

buttons of the remote control.
When the switch is in the center 

position the unit is off.

The Heater ON/OFF Switch 

supplies power to the heater 

fan and the heater element.  

When the switch is in the on 

position the heater operates if the 

thermostat calls for heat.
C.   Heater Thermostat Control
to adjust the temperature to 

your individual requirements, 

turn the thermostat control 

clockwise all the way to turn 

on the heater.  When the room 

reaches the desired temperature, 

turn the thermostat knob counter 

clockwise until you hear a click.  

Leave in this position to maintain 

the room temperature at this 

setting.  For additional heat, turn 

clockwise until you hear the click 

again and the heater will turn on.

Should the heater overheat, an 

automatic cut out will turn the 

heater off and it will not come 

back on without being reset.  It 

can be reset by switching the 

Main Three Position ON/OFF 

Switch to OFF and waiting 5