Amcor AMH8 Benutzerhandbuch

6

1.  The thermostat maintains the desired room temperature 

automatically by switching on and off.

2.  Make sure the thermostat is on the “OFF” position 

before plugging the heater.

3.  Plug the heater.

4  ON/OFF Thermostat control knob controls the 

temperature setting of the heater, and it also turns 
the heater ON/OFF.  When the arrow (a) indicated 
below lines up with the “0” in the knob, the heater is turned OFF.  
Rotating the control clockwise turns the heater ON and increases 
the temperature setting of the heater. 

5.  Adjust the temperature as desired. 

Once the heater is turned ON, the power light will illuminate.

6.  The further the knob is turned clockwise the higher the

setting temperature – see “Thermostat Setting”

7.  Pilot light indicator (b) shown below indicates when the 

heater is operating.  This indicator will light up when the 
heater is ON and heating up and will be OFF when the heater
is unplugged, turned OFF, or has reached the desired temperature.

To properly set the heater to the desired temperature we recommend:

•  Turn the knob clockwise, starting with a low temperature setting.

•  Allow the heater to reach its set temperature.

•  If a higher temperature is desired, turn the thermostat knob further clockwise. 

If a lower temperature is desired, turn the thermostat knob counter-clockwise.

•  Turn again the knob clockwise (just a little): in this position the thermostat will 

maintain the comfortable temperature you have selected.