American Power Conversion DX Benutzerhandbuch

Seite von 96
NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting
50
System status
Path: Main > Status > System #
The System status screens include information about the entire System.
Temp & Humidity. 
View the average temperature and humidity readings at the sensors in this System 
(same as the Temp & Humidity scrolling status screen).
Demands. 
View the percentage of output required of a mode to maintain its setpoint in the room.
Group status
Path: Main > Status > Group
The Group Status screen includes information about the member Systems of the Group and their roles.
Group Status. 
View the assigned role and current state of each System in the Group.
Group Run Hours. 
View the run hours for each System in the Group.
Reset Local System Run Hours. 
Reset the run hours of the local System. To reset the run hours for 
the other Systems, you must repeat this step at the display interface of each System. The service 
password is required to perform this action.
Return Sensors
View the average temperature and humidity at the return sensors for this System.
Remote Sensors
View the minimum temperature, average temperature, average humidity, and 
maximum temperature for the remote sensor probes.
Cool/Dehumidify
View the cool mode and dehumidify mode demands (%) and the actual output. 
The actual reading is combined for the cool and dehumidify modes. The actual 
reading for the mode with the largest demand is displayed.
Humidify Demand
View the actual and demanded output for the humidify mode.