American Power Conversion Central Air Conditioning System Benutzerhandbuch
34
NetworkAIR IR Operation, Maintenance, and Troubleshooting
Set Up Network Configuration
Configure the network settings for Network Management Card from the display interface. The
management card allows for remote control and configuration of the NetworkAIR IR In-row
Precision Air Conditioner.
management card allows for remote control and configuration of the NetworkAIR IR In-row
Precision Air Conditioner.
Network config
Path: Main > Setup > System # > Network Config
MAC Address.
Displays the unique network identifier assigned to each Network Management Card
at the factory.
Mode.
Set the method by which the System’s Network Management Card will acquire its network
settings.
• Manual — Scroll down and enter the network settings for the System’s Network Management
Card.
• BOOTP — Set the card to obtain its network settings from a BOOTP server.
• DHCP — Set the card to obtain its network settings from a DHCP server.
• DHCP — Set the card to obtain its network settings from a DHCP server.
IP.
Set the IP address assigned to this System’s Network Management Card (Manual mode only).
MSK.
Set the subnet mask for this System’s Network Management Card (Manual mode only).
GW.
Set the default gateway for this System’s Network Management Card (Manual mode only).
Accept Changes.
You must select Accept Changes to save any modifications to the IP Address,
subnet mask, or default gateway.