Honeywell 5820XL Benutzerhandbuch
IntelliKnight 5820XL Installation Manual
5-6
151209
5.5
Wiring SK SLC Detectors
This section describes how to install SK heat and smoke detectors. All detectors ship with
installation instructions. Refer to the detector’s installation instructions for more detailed
information.
installation instructions. Refer to the detector’s installation instructions for more detailed
information.
This information applies to the following SK models:
•
SK-Photo Photoelectric Smoke Detector
•
SK-Photo-T Photoelectric Smoke Detector with Thermal
•
SK-Acclimate Photoelectric Smoke Detector with Thermal
•
SK-Heat Fixed Temperature Detector
•
SK-Heat-T High Temperature Thermal Detector
•
SK-Heat-ROR Rate-of-Rise Thermal Detector
•
SK-Ion Ionization Smoke Detector
To wire SK detectors:
1. Wire device bases as shown in Figure 5-4.
1. Wire device bases as shown in Figure 5-4.
2. Set the address for each device as described in Section 5.6.
Figure 5-4 Heat and Smoke Detector Connection to the Panel.
Caution: Do not loop wire under Terminal 1 or 2.
Break wire run to provide supervision of connections.
Class A wiring:
Class B wiring:
...............