Honeywell 5820XL Benutzerhandbuch

All SK devices are addressed using the two rotary dials that appear on the device board. Use 
the ONES rotary dial to set the ones place in a one or two digit number, and use the TENS 
rotary dial to set the tens place in a two digit number. 

SK device addresses are handled differently than Hochiki device addresses. The control panel 
recognizes when an SK detector or SK module is installed. For this reason, SK detectors can 
be assigned any unique address from 1 to 99, and SK modules can be assigned any unique 
address from 1 to 99. Unlike Hochiki detectors and modules which share addresses 1 through 
99, there can be an SK detector using address 1 and an SK module using address 1. 0 is an 
invalid address.

Example 1: To select device address 1, turn the ONES rotary dial to 1 and the TENS rotary 
dial to 0 as shown in Figure 5-5.

Example 2: To select device address 42, turn the ONES rotary dial to 2 and the TENS rotary 
dial to 4 as show in Figure 5-5.