MartinLogan Home Theater System Benutzerhandbuch
8
Mounting the Script
5
Move the wall bracket back into position over the wall
anchor and place #12 metal washer on one of the screws
and drive it through the slot at the bottom-back of the
bracket into the mounting anchor. Do not tighten (see
figure 5).
6
Use a level to assure that the wall bracket is perfectly
vertical, then securely tighten the screw at the bottom
of the wall anchor. Next, securely tighten the screw at
the top of the wall bracket (see figure 5).
WARNING! When pivoting the Script into place
in step 7, be careful so as not to damage the top
of the Script cabinet.
7
Check to make sure that a 1-
1
/
2
inch rubber spacer is on
the threaded stud on the bottom of the speaker. Pick up
the speaker and carefully angle the bottom of the Script
into the bracket by inserting the projecting threaded stud
on the bottom of the speaker cabinet through the slot
in the bottom support of the wall bracket (see figure 6).
Figure 5.
Figure 6.