Sony BDV-EF1100 Benutzerhandbuch

Seite von 68
56
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB 
(CEK)\100ADD.fm
masterpage: Left
The language for the soundtrack/
subtitle or angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or 
DVD being played.
Bonus contents or other data that are 
contained in a BD-ROM cannot be 
played.
t Try the following:
1
Remove the disc.
2
Turn the system off.
3
Remove and reconnect the USB 
device (page 25).
4
Turn the system on.
5
Insert the BD-ROM with 
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
t Try the following: 
1
Turn the system off.
2
Remove and reconnect the USB 
device.
3
Turn the system on.
t Make sure that the USB device is 
securely connected to the   (USB) 
port.
t Check if the USB device or a cable is 
damaged.
t Check if the USB device is on.
t If the USB device is connected via a 
USB hub, disconnect it and connect 
the USB device directly to the unit.
The picture/sound is poor/certain 
programs display with a loss of detail, 
especially during fast-motion or dark 
scenes.
t Picture/sound quality may be poor 
depending on Internet content 
providers.
t Picture/sound quality may be 
improved by changing the connection 
speed. Sony recommends a connection 
speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-
definition video.
t Not all videos contain sound.
The picture is small.
t Press V to zoom in.
The [Control for HDMI] function does 
not work (“BRAVIA” Sync). 
t Check that [Control for HDMI] is set 
to [On] (page 47). 
t If you change the HDMI connection, 
turn the system off and on again. 
t If power failure occurs, set [Control 
for HDMI] to [Off], then set [Control 
for HDMI] to [On] (page 47)
t Check the following and refer to the 
operating instructions supplied with 
the equipment. 
• The connected equipment is 
compatible with the [Control for 
HDMI] function. 
• The connected equipment’s setting 
for the [Control for HDMI] function 
is correct. 
USB device
BRAVIA Internet Video
“BRAVIA” Sync 
([Control for HDMI])