Troy-Bilt TB 2454 Hydro Benutzerhandbuch

c.  Place the deck lift lever in the desired mowing 

height setting.

d.  Reinsert the shoulder bolt (with each deck wheel) 

into the index hole that leaves approximately 

½-inch between the bottom of the wheel and the 

pavement. Tighten the flange lock nut and shoulder 

bolt to between 25-30 ft-lbs using a torque wrench.

NOTE: Refer to Adjusting the Deck in the Maintenance 

& Adjustments section of this manual for more detailed 

instructions regarding various deck adjustments.

The fuel tank is located at the outer/left of the dash and holds 

3 gallons of gas. Remove the fuel cap by turning it counter-

clockwise. Use only clean, fresh (no more than 30 days old), 

unleaded gasoline. Fill the tank no higher than the bottom of the 

fill neck to allow space for fuel expansion.

Use extreme care when handling 

gasoline. Gasoline is extremely flammable and the 

vapors are explosive.  Never fuel the machine 

indoors or while the engine is hot or running. 

Extinguish cigarettes, cigars, pipes and other 

sources of ignition.

NOTE: Your tractor is shipped with oil in the engine. 

However, you MUST check the oil level before operating. 

See the Service section for instructions on checking, 

adding and changing oil.

Always check the engine oil level before 

each use as instructed in the engine operator’s 

manual. Add oil as necessary. Failure to do so may 

result in serious damage to your engine