Troy-Bilt TB 2454 Hydro Benutzerhandbuch

NOTE: This Operator’s Manual covers several models. Tractor 

features may vary by model. Not all features in this manual are 

applicable to all tractor models and the tractor depicted may 

differ from yours.
NOTE: References to LEFT, RIGHT, FRONT, and REAR indicate that 

position on the tractor when facing forward while seated in the 

operator’s seat.

Read and follow all safety rules and 

instructions in this manual, including the entire 

Operation section, before attempting to operate this 

machine. Failure to comply with all safety rules and 

instructions may result in personal injury.

The forward drive pedal is located on the right side of the machine, 

along the running board. Press the forward drive pedal forward to 

cause the tractor to travel forward. Ground speed is also controlled 

with the forward drive pedal. The further forward the pedal is 

pivoted, the faster the tractor will travel. The pedal will return to its 

original/neutral position when it’s not pressed.

The reverse drive pedal is located on the right side of the tractor 

along the running board.  Ground speed is also controlled with 

the reverse drive pedal. The further downward the pedal is 

pivoted, the faster the tractor will travel. The pedal will return to 

its original/neutral position when it’s not pressed.

The brake pedal is located on the left side of the tractor, along 

the running board. The brake pedal can be used for sudden stops 

or setting the parking brake.

NOTE: The brake pedal must be fully depressed to activate 

the safety interlock switch when starting the tractor.

The seat adjustment lever is located below the left of the seat. 

The lever allows for adjustment forward or backward of the 

operator’s seat. Refer to the Assembly & Set-Up section for 

instructions on adjusting the seat position.