Windsor SC20 Benutzerhandbuch

SABER (SC)   86038350   01/29/07 

 
The Saber  Compact is a battery powered, hard 
floor scrubber intended for commercial use.  The 
appliance applies a cleaning solution onto a hard 
floor, scrubs the floor with a brush, and then 
vacuums the soiled water back into the recovery 
tank. 
 
The machine's primary systems are the solution 
system, scrub system, recovery system. The 
traction model has a directional control system as 
well. 
 
The function of the solution system is to store 
cleaning solution and deliver it to the scrub 
system. The solution system consists of the 
solution tank, strainer, valve and controls.  The 
solution tank stores cleaning solution (water and 
detergent) until it is delivered to the scrub system.  
The strainer protects the valve from debris.  The 
non-traction model has a ball-type valve which 
controls the delivery of cleaning solution to the 
scrub system. The traction model has a solenoid 
type valve, which controls the delivery of cleaning 
solution to the scrub system.  The valve 
automatically prevents solution flow unless the 
scrub brushes are turned on and the machine is 
being propelled.  The solution control knob 
controls the amount of cleaning solution delivered 
to the scrub system. 
 
The function of the scrub system is to scrub the 
floor.  The scrub system consists of a rotary type 
disk scrub brush, motor, self-adjusting scrub deck 
skirt, lift linkage and controls.  The brush scrubs 
the floor and the motor drives the brush.  The 
brush drive hub allows the scrub brush to follow 
irregularities and changes in the floor without 
loosing contact with floor.  The self-adjusting 
scrub deck skirt controls the cleaning solution on 
the floor so that the squeegee can pick it up.  The 
brush lift lever raises and lowers the scrub deck.  
On the traction model the brush lift lever can be 
locked into an increased brush pressured 
position. 
 
 
 
 
 
 
 
 
 
 
 
 

The function of the recovery system is to vacuum 
the soiled water back into the recovery tank.  The 
recovery system consists of the squeegee, 
vacuum motor, screen, recovery tank and 
controls.  The squeegee wipes the dirty solution 
off the floor as the machine moves forward.  The 
vacuum motor provides suction to draw the dirty 
solution off the floor and into the recovery tank.  
The screen protects the vacuum fan from debris.   
The recovery tank stores the dirty solution.  The 
float ball in the tank activates when the recovery 
tank is full. 
 
On the traction model, the function of the 
directional control system is to control the 
direction and speed of the machine.  The 
directional control system consists of buttons, 
speed control knob/potentiometer, controller and 
transaxle. The speed control knob actuates a 
potentiometer, which signals speed.  The 
controller interprets the forward/reverse signals 
from the buttons and the speed signal from the 
potentiometer to command the transaxle to propel 
the machine in the direction, and at the speed, 
desired. 
 
The buttons on the control handles signal forward. 
When the reverse button on the control panel is 
pushed, in addition to either button on the control 
handles, reverse is signaled.