Monessen Hearth BTU/Hr Benutzerhandbuch

49D0090

Continued

B. MOUNTING HEATER ON OPTIONAL HEARTH BASE
Tools needed:
• #2 Phillips screwdriver

• slotted screwdriver

• electric drill (if securing base to floor)
The optional hearth base kit includes the following:
• Hearth Base

• 4 Wood Screws

• 4 Sheet Metal Screws

• Hearth Insert

• 4 Anchors

• 2 Brass Screws

• Brass Base Trim

Note: To secure hearth base to floor, follow instructions under “Securing Hearth Base to Floor,” page 16.
If not securing hearth base to floor, proceed to “Mounting Heater to Optional Hearth Base,” page 16.

INSTALLATION

Placing Heater on Mounting Bracket
1. Install wall spacers.
2. Attach two (2) rubber bumpers to back of

heater as shown in Figure 10.

3. Locate two (2) horizontal slots on back panel

of heater.

4. Place heater onto mounting bracket. Slide

horizontal slots onto stand-out tabs on mount-
ing bracket.

Figure 10 - Mounting Heater Onto

Mounting Bracket

Horizontal Slots

Stand-Out

Tabs

Mounting

Bracket

(already

attached

to wall)

Rubber

Bumpers