3M G5 Benutzerhandbuch
Operation
November 6 2014 – Revision 2.1
Page 40 of 77
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
Component Identification and Description
Figure 2
•
Adjustment Slide: Push or pull to adjust for a comfortable fit.
•
Indicator LED: Indicates operating status of the headset. See
Indicator Light Modes below.
Indicator Light Modes below.
•
T1 and T2 (Talk:buttons): Connect you to the order point.
4.
When there are two order points, T1 connects to order point 1
and T2 connects to order point 2.
and T2 connects to order point 2.
5.
When there is only one order point, T1 and T2 both connect to
the order point.
the order point.
6.
If you are in Manual Latching or Hands Free modes, the talk
button establishes you as the order taker; and while you are the
order taker, the talk button is an order point mute button (each
tap turns mute on or off to the order point).
button establishes you as the order taker; and while you are the
order taker, the talk button is an order point mute button (each
tap turns mute on or off to the order point).
•
On/Off: Turns the headset on and off. Hold for 3 seconds to turn off.
•
Volume: The up button increases volume, the down button decreases
volume.
volume.
•
Page: Has several functions related to in-store communication:
1.
Talk to all headsets on the same lane (or both lanes depending
upon the configuration), but not to the order point. Press and
hold the page button during normal operation to communicate
with other headsets. There is an option in Global settings to
allow the order taker to hear or not to hear page messages.
upon the configuration), but not to the order point. Press and
hold the page button during normal operation to communicate
with other headsets. There is an option in Global settings to
allow the order taker to hear or not to hear page messages.
2.
Release the order-taker. If the order taker taps the page button,
he or she is no longer the order taker. The next person to press a
talk button becomes the order taker.
he or she is no longer the order taker. The next person to press a
talk button becomes the order taker.
3.
Enter page monitor mode, which permits you to hear only pages
and not any order taking activity. Starting with the power off on
the headset, press and hold the page button while turning it on to
enable page monitor mode. The headset will stay in this mode
until it is powered off and back on.
and not any order taking activity. Starting with the power off on
the headset, press and hold the page button while turning it on to
enable page monitor mode. The headset will stay in this mode
until it is powered off and back on.
4.
Enter temporary page monitor mode. If an operator (but not the
active order taker) taps the page button, the headset will hear
only pages and not any order taking activity. The headset will
stay in this mode until the operator taps the talk button.
active order taker) taps the page button, the headset will hear
only pages and not any order taking activity. The headset will
stay in this mode until the operator taps the talk button.
•
Battery Release: Slide up to remove the battery.
T1
On/Off
T2
Volume up
Battery
Release
Release
Adjustment
Slide
Indicator LED
Volume Down
Page