Sony PDW-70MD Benutzerhandbuch

24

Connections and Settings

  Chap

te

r 2 

 Pr
epa

ra

tio
n

s

These connectors are designed to allow direct contact with 
conductive circuits. Weak voltage may be present because 
of a failure in this unit. To prevent patients from touching 
these connectors accidentally, attach the connector covers 
when the connectors are not being used to connect to other 
devices.

Production of some of the peripherals and related devices 
described in this chapter has been discontinued.
For advice about choosing devices, please contact your 
Sony dealer or a Sony sales representative.

You can connect a video monitor to this unit’s video output 
connectors or to the MONITOR connector. The following 
figure shows an example using a Sony multi-format LCD 
monitor.

You can also superimpose character information such as 
timecode and the unit’s operating status on output video. 
For details, see “Superimposed Text Information” (page 
29).

Connect an HD video monitor using method 1 or 2 in 
the following figure.
When you connect a monitor with method 2, set the setup 
menu item INTERFACE SELECT >D-SUB OUTPUT to 
“YPbPr” (see page 70).