Viking KK823 Benutzerhandbuch
SECTION TSM 845
ISSUE
F
PAGE 6 OF 14
ITEM
NAME OF PART
ITEM
NAME OF PART
ITEM
NAME OF PART
1
Capscrews
5
Ball Bearing (2 Req’d)
9
Bracket
2
External Snap Ring
6
Internal Snap Ring
10
Canister
3
Bearing Housing
7
Key
11
Inner Magnet Assembly
4
Bearing Spacer
8
Outer Mag Assembly
12
Hand Knobs
FIGURE 6
MD-C SERIES COUPLING
1. If unit has a spacer coupling then bracket of coupling
can stay bolted to base Without spacer coupling, either
the reducer will need to be removed or the coupling
unbolting Remove piping to pump, provide a minimum
of 4” of clearance beyond end of coupling shaft Insert
(2) 5” U N C handknobs which have a minimum of 4 5”
of full threads into the two tapped holes at 9 and 3 00
positions on the back of the bearing housing Remove
the (4) 375 capscrews
See Figure 7.
DISASSEMBLY: COUPLING
SERIES MD-C80 COUPLING
CAUTION !
Magnet sets are extremely powerful.
Serious injury may result if proper
procedures are not followed.
2. Turn the handwheels evenly to back out the bearing
housing and outer magnet assembly
See Figure 8.
FIGURE 7
FIGURE 8
.375” CAPSCREWS (4 REQ’D)
HAND KNOBS (2 REQ’D) 2-790-046-999