Technicolor - Thomson DCD-SA1 Benutzerhandbuch

8

(See page 3.)

q

• Press once to turn the power on.
• If a disc is loaded when the power is turned on, playback

starts automatically.

• Press again to set to the “OFF” position and turn the power

off.

w

• Use this button to switch the layer of the Super Audio CD and

to set the top priority playback layer.

• The name of the newly set layer is shown on the display each

time the button is pressed.

The Super Audio CD’s layer (stereo) is played.

The Super Audio CD’s (stereo) DSD signals are converted
into PCM format and played.

The CD layer is played.

✽ For details on “Setting the Top Priority Playback Layer for

Super Audio CDs” (page 12).

e

• Use this to turn the digital output on and off.

r

• Use this to select the program source to be output.

The source played on the set is output.

Both the digital output and the display are turned off. In the
PURE DIRECT mode, neither the DIGITAL OUT button on
the main unit nor the DISPLAY button on the remote
control unit function.

The program source connected to the digital input jack
(COAXIAL) is output.

The program source connected to the digital input jack
(OPTICAL) is output.

STEREO

PCM CONV.

CD

t

• This sensor receives the infrared light transmitted from the

wireless remote control unit.

• For remote control, point the supplied remote control unit

RC-997 towards this sensor.

y

• Refer to page 9.

u

5

• Press this button to open and close the disc holder.

i

9

• Press this button to move the pickup forward to the beginning

of the next track. Press again to move ahead to other tracks.

o

8

• Press this button to return the pickup to the beginning of the

present track. Press again to return to other tracks.

!0

2

• Press this button to stop playback.

!1

1

3

• Press this button to start playback the disc.
• When pressed while the disc holder is open, the disc holder

closes and playback starts.

• Press this button to stop playback temporarily.

!2

• Load discs here. (See page 11.)
• Press the disc holder open/close button 

u

to open and close

the disc holder.

• The disc holder can also be closed by pressing the play/pause

button 

!1

.

!3

• This indicator lights when playing a Super Audio CD.

!4

• When a CD is loaded or the Super Audio CD’s CD layer mode

is set, the Advanced AL24 Processing circuit (which
reproduces analog waveforms) is activated and this lights.
This also lights when digital data is input from one of the
external inputs (OPTICAL or COAXIAL).

!5

• Digital data is output in optical form from this jack.
• Connect using an optical fiber cable (commercially available).

✽ With Super Audio CDs, no digital signals are output.

!6

• This jack outputs digital data.
• Connect using a commercially available 75 Ω/ohms coaxial

pin-plug cord intended for digital audio connections.

✽ With Super Audio CDs, no digital signals are output.

!7

• Digital data is input in optical form to this jack.

!8

• Digital data is input to this jack.

!9

• Connect to an AC power supply using the included power

supply cord.

@0

• Use these jacks for connection to the amplifier’s balanced

input jacks.

• Connect using a Cannon connector (XLR-3-32 type) cord

(commercially available).

@1

• Connect these to the amplifier’s input jacks.
• Connect using the included RCA pin-plug cord or a

commercially available connection cord.