Numark Industries CDN 36 Benutzerhandbuch

CDN 36

 

 

 

 

1.  CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue 

point. 

2.  PAUSE (

II)- Active when the unit is paused. 

3.  PLAY (>)- Active while the unit is actually playing a CD. 
4.  TRACK - Shows the track that the unit is playing. 
5.  TOTAL – indicates when total CD remaining tracks are displayed. 
6.  MINUTES - Shows the minutes elapsed or remaining depending on mode setting. 
7.  SECONDS - Shows the seconds elapsed or remaining depending on mode setting. 
8.  FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the 

frames elapsed or remaining depending on mode setting. 

9.  PROGRAM - Used for preprogramming the track order to be played automatically by the unit.  This is a 

great function if you need to leave the CD player alone. 

10. AUTOSTART – will light when the unit is set to relay from CD unit to CD unit. 
11. CONTINUOUS PLAY – Shows when the unit is set to play back the entire CD without stopping between 

tracks. 

12. SINGLE PLAY- Shows when the unit is set to play just one track at a time. 
13. CD IN – indicates a standard CD is in the unit.   
14. TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time depending on 

the setting of the “time” button. 
TIME MODE -  

15. (Remain) indicates when track remain time is displayed.  
16. (Total) indicates when total CD remain time is displayed 

17. SEARCH – indicates when the unit is searching through the music 
18. NUMERIC DISPLAY - indicating either current pitch or BPM 
19. PITCH - is lit when pitch is being displayed 
20. BPM – is lit when BPM is being displayed 
21. LOOP INDICATOR – Activates as loops are playing 

©2002 Numark Industries 

- 9 - 

http://www.numark.com