Casablanca Fan Company 99148 Benutzerhandbuch

MA020-01 • 03/05/14

1.888.830.1326

Using the single pin connectors, connect 

the black or blue wire from the fan to the 

black wire from the light kit. Connect the 

white wire from the fan to the white wire 

from the light kit. 

Feed the wires through the center hole in 

the switch housing, the washer, and the 

nut. Then install the switch housing by 

twisting clockwise onto the threaded rod. 

Install the washer and nut onto threaded 

rod and tighten securely.

Lift the light kit assembly up so that the 

screw holes in the lower switch housing 

line up with the holes in the upper switch 

housing. Install the switch housing 

screws and tighten securely.

Switch 

Housing 

Screw

Wire    

Connector

Switch 

Housing

If your fan does not have pin 

connectors on the wires coming from 

the switch housing, install the wiring 

harness provided. Using the provided 

wire connectors connect the white 

wire from the fan to the white wire 

from the wire harness and connect the 

black or blue wire from the fan to the 

black wire from the wire harness.

Do not allow the light kit to hang 
only by the wire connections!