Casablanca Fan Company 99148 Benutzerhandbuch

MA020-01 • 03/05/14

1.888.830.1326

Feed the wires through the center hole in 

the switch housing. Then using the single 

pin connectors, connect the black or blue 

wire from the fan to the black wire from 

the light kit. Connect the white wire from 

the fan to the white wire from the light kit.

Lift the lower switch housing up so that the 

screw holes line up with the holes in the 

upper switch housing. Install the switch 

housing screws and tighten securely.

Lift the light kit up, tucking the wires into 

the hole in the switch housing. Install the 

center stem of the light kit into the lower 

switch housing by turning the threaded 

rod clockwise into the threaded hole. 

Continue turning until tight.

Upper 

Switch 

Housing

Threaded 

Rod

Wire    

Connector

Switch 

Housing

If your fan does not have pin connectors on 

the wires coming from the switch housing, 

install the wiring harness provided. Using 

the provided wire connectors connect the 

white wire from the fan to the white wire 

from the wire harness and connect the 

black or blue wire from the fan to the black 

wire from the wire harness.

Do not allow the light kit to hang 
only by the wire connections!

Lower 

Switch 

Housing

Switch 

Housing 

Screw