Kenwood KRF-V6300D Benutzerhandbuch

English

Adjusting the sound

TONE

BASS BOOST

MULTI CONTROL
O/

ACTIVE EQ

MULTI CONTROL

ACTIVE EQ

Adjusting the Tone

¶ Operation available only on the remote control unit.

The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo".

œ Press [TONE] to select the Tone mode.

∑ Use [MULTI CONTROL

∞/5] to select "TONE ON" or

"TONE OFF".

é When in "TONE ON" selection, press [TONE] for the

following displays.

Display

Setting

Range

"BASS"

Adjusts low frequency range.

-10 – +10 (in 2 step)

"TREB"

Adjusts high frequency range.

-10 – +10 (in 2 step)

® Use [MULTI CONTROL

∞/5] to adjust the sound

quality.

† Press [TONE].

• When the ACTIVE EQ mode is set to ON, set it to OFF and then

control the TONE setting.

Bass Boost

¶ Operation available only on the remote control unit.

The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo".

Press [BASS BOOST].

Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.

To cancel

Press [BASS BOOST] again.

• Bass Boost does not function when this unit is in the sound

quality or ambience effects adjustment mode.

• When the ACTIVE EQ mode is set to ON, set it to OFF and then

control the Bass Boost setting.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in
PCM and analog stereo mode.

Press [ACTIVE EQ] for the following selections.

Display

Setting

"ACTIVE EQ MUSIC"

Effective when listening to music.

"ACTIVE EQ CINEMA"

Effective when watching a movie.

"ACTIVE EQ GAME"

Effective when playing a game.

"ACTIVE EQ OFF"

Active EQ function is off.

ACTIVE EQ indicator lights up.

• ACTIVE EQ function will not be available when REC MODE, AUTO

TUNING or PRESET MEMORY is ON.

B60-5772-00_00_EN.indd 39

08.7.24 1:29:49 PM