Roland VS-20 Benutzerhandbuch
42
Troubleshooting
If data cannot be recorded while recording audio, or if data cannot be fully processed during playback, Guitar Tracks
4 will automatically halt. This is called a dropout. Clicks or pops may also occur if problems occur in communication
between Guitar Tracks 4 and the V-STUDIO 20 hardware.
4 will automatically halt. This is called a dropout. Clicks or pops may also occur if problems occur in communication
between Guitar Tracks 4 and the V-STUDIO 20 hardware.
There are a variety of possible reasons why clicks, pops, and dropouts might occur. To eliminate the cause of the
problem, follow the checkpoints listed below.
problem, follow the checkpoints listed below.
If problems occurs even with small projects
Increase the Mixing Latency
Extremely short Mixing Latency settings will place an excessive processing load on your computer.
Try changing the Driver Mode
Since the V-STUDIO 20 hardware supports both WDM/KS and ASIO, you can try changing the “Audio Driver
Settings” (p. 24).
Settings” (p. 24).
Install the correct device driver
Even for your non-audio devices, make sure that the correct device drivers for your computer system are installed
and that your computer is running correctly. You should pay particular attention to this if you’ve modified your
computer or added peripheral devices, or if you’re using a computer that you assembled yourself.
and that your computer is running correctly. You should pay particular attention to this if you’ve modified your
computer or added peripheral devices, or if you’re using a computer that you assembled yourself.
Lower the screen resolution
Some computers have graphics functionality that places a heavy load on the CPU. You may be able to lighten this
load by lowering the screen resolution.
load by lowering the screen resolution.
Uninstall the drivers of audio interfaces you’re not using
Some audio interfaces not intended for use in music production may cause problems with other audio interfaces (e.g.
the V-STUDIO 20 hardware). If Guitar Tracks 4 does not perform as well as you expect, try using the Device Manager to
disable the standard audio functionality of your computer, or physically remove it and then uninstall the device.
the V-STUDIO 20 hardware). If Guitar Tracks 4 does not perform as well as you expect, try using the Device Manager to
disable the standard audio functionality of your computer, or physically remove it and then uninstall the device.
Disable other hardware devices
Other hardware devices may interfere with the performance of your audio device. We recommend that you disable
any unnecessary hardware devices, such as network adapters and internal sound cards.
any unnecessary hardware devices, such as network adapters and internal sound cards.
Eliminating Clicks and Dropouts
VS-20_e.book 42 ページ ２０１０年１月１８日 月曜日 午前９時８分