ONKYO CS-265DAB Benutzerhandbuch

En-

24

q]/[w] buttons to select “On,” then 

press the [ENTER] button.
The Auto Change function is now enabled.
To disable the Auto Change function, select 
“Off,” then press the [ENTER] button.

Note:
• The factory default for the Auto Change function is 

“On.” If you do not want the CD receiver to 
automatically change the input source to Bluetooth 
each time you turn on the power to a Bluetooth-
enabled device, disable the Auto Change function.

• If you touch the NFC detection area of your 

smartphone or tablet to the NFC mark on the CD 
receiver, the input source will automatically switch to 
Bluetooth, even if the Auto Change function is 
disabled.

If pairing fails, or if a Bluetooth connection cannot be 
established, or if you have any other problems related to 
Bluetooth, try to reset Bluetooth on the CD receiver.
If you reset Bluetooth on the unit, all pairing 
information will be deleted and you will need to pair the 
devices again.

q]/[w] 

Press the [ENTER] button again.
Bluetooth is reset and the “Complete” message 
appears.

Note:
• After resetting Bluetooth, delete the device 

registration (pairing information) on the Bluetooth-
enabled device, and perform the pairing process for 
the CD receiver and the device again.

The CD receiver features an NFC (Near Field 
Communication) function. You can establish a 
Bluetooth pairing and connection at once by making 
physical contact between the CD receiver and your 
NFC/Bluetooth-enabled smartphone or tablet.

Enable the NFC function on your NFC-
enabled smartphone or tablet.
For more information, refer to the user manual for 
your NFC-enabled smartphone or tablet.
If necessary, start the NFC connection app. Also, 
if the screen of your device is locked, unlock it.

Touch the NFC detection area of your 
smartphone or tablet to the NFC mark on 
top of the CD receiver.
Do not move your smartphone or tablet until it 
responds to a touch operation with a sound or 
other indication.

Establish the connection by following the 
instructions on the screen of the 
smartphone or tablet.
The pairing is now complete and Bluetooth 
connection is established. The 

 indicator 

lights up on the CD receiver.

Start playback on the smartphone or 
tablet.
If the volume level on the smartphone or tablet is 
low, the playback volume relative to other input 
sources will be low. In that case, raise the volume 
level on the smartphone or tablet to an appropriate 
level (if necessary, to the maximum).

Tip:
• When you touch the NFC-enabled smartphone or 

tablet to the CD receiver, the power to the receiver is 
turned on, the input source is set to Bluetooth, and a 
Bluetooth connection is established. To cut the 
connection, touch the device to the receiver again.

• During Bluetooth connection, if you touch another 

NFC-enabled smartphone or tablet to the CD 
receiver, the connection to the original Bluetooth-
enabled device will be cut, and a new NFC-enabled 
smartphone or tablet will be connected.

Note:
• If there is no response when you touch the device to 

the CD receiver, the location of the contact may be 
offset. Move the touch location by sliding the device 
while maintaining the contact with the receiver.