ONKYO CS-265DAB Benutzerhandbuch

En-

25

• Some devices may not be able to pair or connect by 

touch (NFC). In such a case, try to establish the 
connection manually (see page 23).

• Do not leave the NFC/Bluetooth-enabled smartphone 

or tablet on the NFC mark on the CD receiver. NFC 
function will conflict with CD receiver’s operations.

If the Bluetooth Standby function is enabled, 
establishing a Bluetooth connection from your 
Bluetooth-enabled device will automatically turn on the 
power to the CD receiver and Bluetooth will be selected 
as the input source.

q]/[w] 

q]/[w] buttons to select “On”, 

then press the [ENTER] button.
The Bluetooth Standby function is now enabled.
To disable the Bluetooth Standby function, select 
“Off”, then press the [ENTER] button.

Place the CD receiver in standby mode.
Now the CD receiver is in Bluetooth Standby 
mode.

Note:
• Power consumption during Bluetooth Standby mode 

increases compared to normal standby mode.

• Some Bluetooth-enabled devices establish a 

Bluetooth connection once the power to these devices 
is turned on. These devices will automatically turn on 
the power to the CD receiver if the Bluetooth Standby 
function on the CD receiver is enabled.

• If you touch the NFC detection area of your 

smartphone or tablet to the NFC mark on the CD 
receiver, the power to the CD receiver will be 
automatically turned on, and the input source will 
switch to Bluetooth, even if the Bluetooth Standby 
function is disabled.