ONKYO CS-265DAB Benutzerhandbuch

En-

32

q]/[w] buttons to select a 

playback device, then press the [ENTER] 
button.
For a playback device, you can select from CD, 
USB/iPad, DAB, FM, and LINE. If you select an 
option other than DAB and FM, skip to step 5.

q]/[w]buttons to select the 

q]/[w] buttons to set the timer 

frequency to everyday, every specified 
day(s) of the week, or once. Then press 
the [ENTER] button.
Everyday: The timer works every day. 

➞Skip to 

step 8.
Every: The timer works every specified day(s) of 
the week. 

➞Skip to step 6.

Once: The timer works one time only. 

➞Skip to 

step 7.

e]/[r] buttons to move the 

q]/[w] buttons to set that 

Skip to step 8.

q]/[w] buttons to select the day of 

q]/[w] buttons to set the hour for 

q]/[w] buttons to set the minute 

for the “On” (start) time, then press the 
[ENTER] button.
When you change the “On” time, the “Off” time 
is set to one hour later automatically.

q]/[w] buttons and [ENTER] button to set 

q]/[w] buttons to adjust the 

timer playback volume level, then press 
the [ENTER] button.
You cannot set the volume level to “0.” Instead, you 
can select “Last” (the volume level used last time).

Set the CD receiver to standby mode.
If the CD receiver is on, the timer will not work. 
Be sure to set the CD receiver to standby mode at 
least two minutes prior to the timer “On” time.

Note:
• If two timer settings overlap, the second timer will not 

work. Set the timers carefully so that the timer 
duration (between “On” and “Off”) will not overlap.

• If the sleep timer is activated while the CD receiver is 

playing due to one of the programmable timers, the 
sleep timer setting will take precedence, and the CD 
receiver will not stop at the “Off” time.

• If you have selected a CD, USB flash drive, or iPod 

as the playback device, set the device ready for 
playback, and place the CD receiver in standby mode.

• If you have selected LINE as the playback device, 

LINE will be selected as the input source at the “On” 
time, and the specified volume level will be set, but 
nothing else will occur. If you want to play an 
external device connected to the LINE IN jacks, 
program a timer on the external device.

Once a timer has been programmed, you can turn it off 
or on again, as desired. Also, if a timer is set to “On,” 
you can view and modify the timer setting.

Press the [TIMER] button repeatedly to 
select a timer number.
The timer is activated if the “On” is flashing on 
the display.

q]/[w] buttons to select “On” or 

“Off”, then press the [ENTER] button.
If you select “Off,” the programmed timer is 
disabled (the setting itself is stored), and the CD 
receiver returns to the previous display.
Select “On” to view and modify the timer setting 
(if necessary) (see page 31).

When the clock is displayed, the currently-enabled 
timer's number appears near the left end of the display.

Timer number

Day of the week of the current 
cursor position

Example: The timer works on Monday, Wednesday, 
Friday and Sunday.

: Off