Siemens CCMX1315-LP Benutzerhandbuch
Configuration
36
Siemens Building Technologies
Fire Safety & Security Products
01.2009
7.4.4
Alarm output
z
Alarm mode:
The alarm output can be turned OFF or be activated when any of the following
events occurs:
The alarm output can be turned OFF or be activated when any of the following
events occurs:
–
B/W: when the camera changes to monochrome
–
Event: Once alarm input1 or alarm input 2 or motion is triggered, the alarm out
will be triggered immediately as well.
will be triggered immediately as well.
z
Output hold time:
Set a time to hold alarm output. Choose either 0, 5, 10, 15, or 30 seconds. This
function is used when connecting to alarm output terminals and activating a
siren, buzzer or emergency light.
Set a time to hold alarm output. Choose either 0, 5, 10, 15, or 30 seconds. This
function is used when connecting to alarm output terminals and activating a
siren, buzzer or emergency light.
7.4.5
Audio Event
You can choose which audio *.wav file you want to upload as a voice alarm
message to the SD card from your PC. There are 4 audio events available for
upload. You can select in the appropriate menu which audio event is to be played
with which event (Motion or Alarm input 1).
message to the SD card from your PC. There are 4 audio events available for
upload. You can select in the appropriate menu which audio event is to be played
with which event (Motion or Alarm input 1).