Tandberg Data 1080P Benutzerhandbuch
D14640.01—MARCH 2010
23
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents
Introduction
Physical interface
Cables
Connecti to codec
Video formats
Daisy chaining
Appendices
Contact us
www.tandberg.com
Command
Command Packet
Comments
MM_Detect_On
8x 01 50 30 01 ff
Turn on the Motor Moved
Detection (camera recalibrates if
touched)
Detection (camera recalibrates if
touched)
MM_Detect_Off
8x 01 50 30 00 ff
Turn off the Motor Moved
Detection (camera does not
recalibrate if touched)
Detection (camera does not
recalibrate if touched)
Call_LED_On
8x 01 33 01 01 ff
Refers to orange LED on top
of camera. Will always be off at
startup.
of camera. Will always be off at
startup.
Call_LED_Off
8x 01 33 01 00 ff
Call_LED_Blink
8x 01 33 01 02 ff
Power_LED_On
8x 01 33 02 01 ff
Green power LED. If switched to
off and stored to startup profile, it
will always be off.
off and stored to startup profile, it
will always be off.
Power_LED_Off
8x 01 33 02 00 ff
IR_Output_On
8x 01 06 08 02 ff
See IR push message.
IR_Output_Off
8x 01 06 08 03 ff
IR_CameraControl_On
8x 01 06 09 02 ff
Lets up/down/left/right/zoom+/-
on the IR remote control the
camera directly. Those keycodes
will be sent to the controller if IR
Output is on.
on the IR remote control the
camera directly. Those keycodes
will be sent to the controller if IR
Output is on.
IR_CameraControl_Off
8x 01 06 09 03 ff
Command
Command Packet
Comments
Power_On
8x 01 04 00 02 ff
Power control. This command
stores the zoom and focus value
and reset these motors. Used for
Tiger if the camera was on for a
long time.
stores the zoom and focus value
and reset these motors. Used for
Tiger if the camera was on for a
long time.
Power_Off
8x 01 04 00 03 ff
Video_Format
8x 01 35 0p 0q 0r ff
Selects video format. p =
reserved. q = video mode. r =
See the chapter about the DIP
switch settings
reserved. q = video mode. r =
See the chapter about the DIP
switch settings
WB_Auto
8x 01 04 35 00 FF
WB: White Balance
WB_Table_Manual
8x 01 04 35 06 ff
WB_Table_Direct
8x 01 04 75 0p 0q 0r 0s ff
Used if WBmode = Table manual
pqrs = wb table.
pqrs = wb table.
AE_Auto
8x 01 04 39 00 FF
AE: Automatic Exposure.
AE_Manual
8x 01 04 39 03 FF
Iris_Direct
8x 01 04 4B 0p 0q 0r 0s FF
Used if AE mode = Manual. pqrs:
Iris position, range 0..50
Iris position, range 0..50
Gain_Direct
8x 01 04 4c 0p 0q 0r 0s FF
Used if AE mode = Manual. pqrs:
Gain position, values:12-21dB.
Gain position, values:12-21dB.
Backlight_On
8x 01 04 33 02 FF
BacklightCompensation mode
Backlight_Off
8x 01 04 33 03 FF
Mirror_On
8x 01 04 61 02 ff
Sony calls this CAM_LR_Reverse.
RR (FT/AT mirror command)
RR (FT/AT mirror command)
Mirror_Off
8x 01 04 61 03 ff
Flip_On
8x 01 04 66 02 ff
Sony calls this CAM_ImgFlip.
Flip_Off
8x 01 04 66 03 ff
Gamma_Auto
8x 01 04 51 02 ff
Gamma mode. Default uses
gamma table 4.
gamma table 4.
Gamma_Manual
8x 01 04 51 03 ff
Gamma_Direct
8x 01 04 52 0p 0q 0r 0s ff
pqrs: Gamma table to use in
manual mode. Range 0-7.
manual mode. Range 0-7.
The VISCA™/RS–232 control protocol, cont...
Camera commands
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Appendices