JVC VN-685U Benutzerhandbuch

This page is for performing detailed network setting.

This page can be used during access using 

AadminB.

● Click [Advanced Settings] to display setting menu.
● Click [Network Details]. Press the [OK] button to enable the new settings.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the 

entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

A
B

C

D

E

F

Click

A

For setting the TOS value of IP packets in which JPEG is stored.
The upper six bits out of the eight bits that make up the TOS value belong to 
DSCP.
This upper six bits can be set. The lower two bits are 

A0B. For example, upon 

setting to 

A255B, the lower two bits are converted to A0B, and the value 

becomes 

A252B.

TOS values are used in networks that support QoS. By setting QoS for the 
network switch, routing can be done by giving priority to packets with a larger 
TOS value.

B

For setting the TOS value of IP packets in which MPEG4 is stored.
For details, refer to the [JPEG TOS(DS field)] item A above.

C

For setting the TTL value of JPEG/MPEG4 packets that are to be sent via 
TCP.

D

For setting the TTL value of JPEG/MPEG4 packets that are to be sent via 
multicast.

E

For setting the maximum packet size for storing JPEG/MPEG4.

F

For setting the [Negotiation] of the [Network Details].
When a value other than 

AAutoB is selected, do not set the network device to 

be connected to 

AAutoB. Ensure that it is set to the same value as the 

camera.