JVC VN-685U Benutzerhandbuch

This page is for changing the HTTP server port number.

This page can be used during access using 

AadminB.

● Click [Advanced Settings] to display setting menu.
● Click [Protocol]. Press the [OK] button to enable the new settings.
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.

● If Built-in Viewer is used for playback, change the [HTTP Port] number in the setting screen of Built-

in Viewer to the same value. (

A Page 119)(A Page 121)

A

B

C

D

Click

A

You can change the port number for the built-in web server of the camera. 

 

(1-65535)
The default port number setting is 

A80B. The port number of JPEG/MPEG4 

server is changed also.
To access to camera from the Internet Explorer, enter the following in the 
Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to 

A8080B, for example, enter the Internet 

Explorer as follows.
http://192.168.0.2:8080

B

You can change the On/Off setting of VSIP Protocol. To use this unit from 
Nextiva of Verint Systems Inc., select 

AOnB.

C

You can change the port number for Built-in VSIP server of the camera. 

 

(1-65535) The default port number setting is 

A5510B.

D

You can change the On/Off setting of AMX device detection protocol. Set to 

AOnB when you are using the camera on AMX’s systems.
[Setting value:On , Off]