AVerMedia Technologies EB1304 Benutzerhandbuch

11 

 

For the fist time using the DVR unit, suggest user connect with the monitor and setup 

DVR unit by OSD menu. Once the DVR unit has been set up, user can use LED panel 

with remote control to modify setup of DVR unit.   

Before starting setup the DVR unit, please select the setup mode and video system. 

DVR unit has two setup modes – OSD and LED mode. By adjusting switch, user can 

change the setup mode. The following figure shows the setup mode switch setting.   

.

ON

1 2

3

ON

1 2

3

OSD

LED

VGA

TV

NTSC

OSD

VGA

NTSC

PAL

LED

TV

PAL

The DVR unit supports two system types – NTSC and PAL. Please select the correct 
video system before power on the unit. 

 

Before set up the DVR unit, please make sure the setup mode that is the 

one user wants to use. Otherwise, the DVR unit won’t be able to receive 

remote control signal correctly.   

Upon connecting the power, the unit automatically detects the status of the hard disk. 

The hard disk must be formatted for the first time using with DVR unit. If you are 
prompt to format the hard disk, press 

 (select) for YES to format the hard disk 

and 

 (menu) for NO to remain unchanged.