AVerMedia Technologies EB1304 Benutzerhandbuch

 

12 

Before starting record video, adjust the date and time first.   

1. Press 

  to call up the OSD menu and then use 

▲

 and 

▼

  to go up and 

down and select Submenu. And then, press

  to confirm the selection. 

2.  In Submenu, select the Date and press 

  again to make a selection. And then, 

use 

▲

 and 

▼

 to adjust the date and use 

▼

 and 

▼

 buttons to move 

the selection to the left and right. 

3.  To adjust Time, follow the above step 2 and 3. 

4. Press 

  to go back to main menu after adjustment. 

User can switch to display each channel in full screen or 4 channels at the same time 

in D1 or CIF record mode. 

To know if the channel is being recorded, the “ ” record symbol would appear beside 

the channel number. The   (microphone) and    (speaker) indicate the availability of 

audio. The information below the screen shows the current date and time, recording 

mode (record schedule setting), hard disk drive (Master/Slave) and the percentage of 

the used hard disk space. 

 

Full screen Preview 

 

Quad Screen Preview 

When you are in full screen preview, press the following buttons on the remote control 
and control panel to switch to different channel, or preview all 4 channels: 

 

CH1: Camera 1 

 

CH2: Camera 2 

 

CH3: Camera 3 

 

CH4: Camera 4 

QUAD:4-Channel

If the unit is recording the video, you may have to stop video recording in order to do 

video playback. To stop video recording, press

.