AVerMedia Technologies EB1304 Benutzerhandbuch
4
1.4 Back
Panel
(1)
(3)
(5)
(7)
(8)
(10) (11) (12)
(2)
(4)
(6)
(9)
Name
Function
(1) Audio In
: Input the audio signal from a microphone or audio output device.
The audio is embedded with channel 1
i
The audio input device must be power supplied by
external power.
external power.
(2) Audio Out
: Output the audio signal to a speaker
i
The audio output device must be power supplied by
external power.
external power.
(3) CH1
: Input the video camera signal and display it on channel 1
(4) CH2
: Input the video camera signal and display it on channel 2
(5) CH3
: Input the video camera signal and display it on channel 3
(6) CH4
: Input the video camera signal and display it on channel 4
Output the video signal to a TV
(7) Video Out (BNC)
:
The DVR unit support 2 video output ports and you can
only select to output the video either from the VGA OUT or
VIDEO OUT
only select to output the video either from the VGA OUT or
VIDEO OUT
(8) VGA Out
: Output the video signal to a CRT or LCD monitor
(9) Sensor In & Alarm
Out
: Support up to 4 sensor device and 1 relay device (Relay: 1A @
125V AC/30V DC)
(10) TV-VGA/OSD-LED/
NTSC-PAL Switch
: Switch to select the video output, setup mode (OSD/LED panel,
also see
), and video system(NTSC/PAL) Make sure
to set the video output, setup mode, and video system before
turning on the unit
turning on the unit
(11) 12V Out
: Connect the camera power cable to supply power for cameras
(12) 12 ~ 24V DC
:
Connect the power cable to this port. The power cable connects to
vehicle battery for supplying the power to DVR unit.
vehicle battery for supplying the power to DVR unit.