AVerMedia Technologies EB1304 Benutzerhandbuch

5 

 

The DVR unit allows you to install one hard disk. Before installing the hard disk, make 

sure to set the hard disk master/slave jumper setting. Adjust the jumper setting 

according to the instructions on the hard disk label. Please set the jumper of hard disk 

as Master. Follow the illustrated instructions below to install the hard disk: 

1.  Using key to unlock the hard disk key 

lock 

 

2.  Pull removable hard disk drawer out 

 

3.  Connect the power connector to the 

hard disk (master) 

 

4.  Connect the IDE cable to hard disk 

 

 

5.  Turn the drawer over and secure the 

hard disk with 4 screws on the hard 
disk removable drawer 

 

 

6.  Slide the drawer back 

 

 

7.  Using key to lock the hard disk key 

lock 

 

8.  You may now connect all the cables. 

When the power is connected, the 

Power LED light 

 

turns on 

i

 

-  Use 40GB/ 7200RPM IDE hard disk or larger is recommended. 

-  The DVR unit support hard disk hot swap. Therefore, user can swap the 

hard disk without shutdown the DVR unit.