Woods Equipment CZR2242B Benutzerhandbuch

22

___   Review and follow all safety rules and safety
 

decal instructions.

___   Check that all safety decals are installed and in 

good condition.  Replace if damaged.

___   Check to make sure all shields and guards 

are properly installed and in good condition.  
Be sure that either the discharge shield or 
complete vacuum attachment is installed.

___   Check that all hardware is properly installed.
 

and secured.

___   Check that equipment is properly and securely 

attached to power unit.

___   Check to be sure engine is free of dirt and
 

debris.  Pay particular attention to the cooling

 

fins, governor parts and muffler.  Clean air 
intake screen.  Check air cleaner; service if 
necessary.

___  Never allow riders.
___   Inspect area and remove stones, branches or
 

other hard objects that might be thrown, 
causing injury or damage.

___   Clean area around oil fill dipstick.  Remove 

dipstick and check to be sure oil is in operating 
range (between marks on dipstick).  Add oil if 
necessary but 

Do Not Overfill.  Install dipstick 

assembly firmly until cap bottoms out on tube.  
Dipstick assembly must always be secured into 

fill tube when engine is running.

___   Check all lubrication points and grease as
 

instructed in manual.

___   Check hydrostatic fluid level.  Check to be sure 

cooling fins on hydrostat are clean.

___   Perform a functional check of the safety 

interlock system each time you operate the 
unit.