Woods Equipment CZR2242B Benutzerhandbuch

23

-  Fill fuel tank with good quality, clean, unleaded 

regular gasoline.  Do not use hi-test fuel.

-  Use a funnel to avoid spilling.

TO CHECK OR ADD FUEL:
–  Do it outdoors

–  Do not smoke
–  Stop engine; allow to cool
–  Fill to one inch below bottom 

of filler neck

–  Do not overfill
–  Clean up spilled fuel

-  Be familiar with all controls, how each functions 

and what each operates.

-  Check the engine oil level and add if necessary.  

Using the fuel selector valve, select which tank 
will supply fuel

-  Choke: For cold starts, set the throttle lever to the 

half-open position and pull the choke out to the 
ON position.  For warm starts set the throttle to 
the half-open position and the choke to the OFF 
position.

OPERATOR PRESENCE 
INTERLOCK SYSTEM 

To start the engine:

-

 

The PTO switch must be OFF.

-

 

Both traction levers must be in the neutral lock 
position.

-

 

The parking brake must be ON.

To operate the machine:

1.  The operator must be in the seat or engaging the 

PTO will kill the engine.

2.  The parking brake must be OFF and the opera-

tor must be in the seat, or moving a traction lever 
from the neutral lock position will kill the engine.  

1.  Turn the key to operate the electric starter to start 

the engine.  Release the key when the engine 
starts. 

2.  If the engine does not start immediately, do not 

crank for more than 10 seconds at a time.  Allow 
60 seconds for the starter motor to cool down 
between starting attempts to prevent the starter 
motor from burning out.  

3.  If the choke is ON when the engine starts, 

gradually back it off until the engine runs with no 
choke at all.