Woods Equipment CZR2242B Benutzerhandbuch

25

1.  Place the discharge chute in the down position or 

correctly fit a grass collector or mulcher plate.

2.  Sit in the seat. 

3.  Start the engine.

4.  Turn the blades on by pulling up on the PTO 

switch.  Do not start the blades at full throttle. 
Instead, use the slowest throttle setting that will al-
low the engine to pick up the blade load to reduce 
the wear on the belts and electric clutch.

5.  After the blades are rotating, set the throttle to 

maximum.  Use the traction levers to obtain the 
required cutting speed, to steer around obstacles 
and to turn at the end of a cut.

-  When mowing large areas, start by turning to the 

right so that clippings will be discharged away 
from shrubs, fences, driveways, etc.  After two or 
three rounds, mow in the opposite direction, left 

hand turns, until finished.

-  If grass is extremely tall, it should be mowed 

twice, the first cut relatively high, the second cut to 
the desired height.

-  Use the left side of the mower for trimming.

-  Choose cutting directions so that clippings are 

thrown onto areas that already have been cut.  
This method results in the most even distribution 
of clippings and more uniform, better appearing 
cuts.  

-  Use a different mowing pattern each time where 

possible.  This helps prevent rutting and leads 
to a more uniform cut by keeping the grass from 
always laying the same way.

DANGER

–  KEEP HANDS AND FEET AWAY.
–   STOP ENGINE AND LET BLADES STOP 

–  KEEP AREA CLEAR OF PEOPLE 
 

–  REMOVE OBJECTS BLADE MAY 

–  STOP BLADES TO CROSS GRAVEL 

–  DO NOT OPERATE WITHOUT CHUTE, 

WARNING