Alamo Lawn Mower Benutzerhandbuch

AXTREME  2  02/10

Operation Section 3-48

© 2010 Alamo Group

Before transporting tractor between locations, idle the tractor engine, disengage the attached head, and wait
for all head motion to come to a complete stop.  Place the boom in its storage cradle rest support and then turn
the joystick master switch to the OFF position.   

•

Placing Boom Articulating Arm on Boom Arm 
Rest

•

Extend the dipper section approximately half 
way out.

•

Bring the Lift to its full height and carefully 
swing the boom back until it is just positioned 
over the Boom Rest.  NOTE:  There is a formed 
“V” plate on the boom arm that fits onto the 
boom arm rest.

•

Lower the boom arm until this “V” rests on the 
Boom Rest.

•

Place the Master Switch in to the OFF position.

The boom is now in the transport position. To
remove the boom from the Boom Rest, pull the Lift
back and raise the boom about 6 inches. Then
Swing the boom around to the desired position.
OPS-B- 0013_D

Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.  

(SG-10)

Before transporting the tractor on a public roadway
or boarding a trailer for transport, the tractor brake
pedals should be locked together.  Locking the
pedals ensures that both wheels brake
simultaneously while stopping, especially when
making an emergency stop.

Use extreme caution and avoid hard applications of
the tractor brakes when towing heavy loads at road
speeds.  Never tow the implement at speeds
greater than 20 MPH (25 kph).  OPS-U- 0018