Alamo Lawn Mower Benutzerhandbuch

SAFETY

AXTREME 2 02/10

Safety Section 1-13

SAFETY

Always disconnect the wire leads from the mower pump solenoid

before performing service on the Tractor or Mower. Use caution when

working on the Tractor or Mower. Tractor engine must be stopped before working on

Mower or Tractor. The Mower Blades could inadvertently be turned on without warning

and cause immediate dismemberment, injury or death.

(SBM-12a)

All Safety Shields, Guards and Safety devices including (but not

limited to) - the Deflectors, Chain Guards, Steel Guards,

Gearbox Shields, PTO integral shields , and Retractable Door

Shields should be used and maintained in good working condition. All safety

devices should be inspected carefully at least daily for missing or broken

components. Missing, broken, or worn items must be replaced at once to reduce

the possibility of injury or death from thrown objects, entanglement, or blade

contact.

(SBM-18)

DO NOT allow any person under a raised boom or mower head unless

it is securely locked up or supported. DO NOT approach the

Implement unless the Tractor is turned off and all motion has ceased. Never work under

the frame work, or any lifted component unless the implement is securely supported or

blocked up. Inadvertent contact with the controls could allow a component to fall. A

sudden or inadvertent fall by any of these components could cause serious injury or even

death.

(SBM-22)

Always maintain the safety signs in good readable condition. If the safety signs are missing,

damaged, or unreadable, obtain and install replacement safety signs immediately.

(SG-5)

Do not modify or alter this Implement. Do not permit anyone to modify or alter this

Implement, any of its components or any Implement function.

(SG-8)

Never work under the Implement, the framework, or any lifted

component unless the Implement is securely supported or blocked up

to prevent sudden or inadvertent falling which could cause serious

injury or even death.

(SG-14)

Never attempt to lubricate, adjust, or remove material from the Implement while it is in

motion or while tractor engine is running.

(SG-20)