Alamo TX235 Benutzerhandbuch

TX235 02/07

Operation Section 4-39

© 2007 Alamo Group Inc.

Streaking

Slow Blade Speed

Operate PTO at 540 RPM.

Worn Blade Tips

Replace with Genuine RHINO blades.

See your Rhino dealer.

Dull Blades

Sharpen blades uniformly.

Blades unable to cut that part

Slow ground speed of tractor but keep 

of grass pressed down by 

engine running at full PTO RPM.          

path of tractor tires or casters

Cutting slower will help.

Mowing too fast

Slow down until cured.

Drive belt loose

Tighten per Instructions.

Belt glazed/slipping

Apply belt dressing or replace with

special RHINO belt.

Blade loose on Spindle.

Tighten blade bolt securely.

(Note: Left hand threads Torque to 150 

Conditions too wet for mowing

Allow grass to dry before mowing.

Material Discharges

Material too high and too much

Reduce ground speed but maintain

from Mower Unevenly

material

540 RPM at tractor PTO, or make two

Bunches Material

passes over material. Raise the

along Swath

mower for the first pass and lower to
desired height for the second and cut 

at 90 degrees to first pass. Raise rear 
of mower high enough to permit 
material to discharge, but no so high 
that conditions listed above occur.

Belt Slipping

Tighten or replace with special

RHINO belt.

Grass Wet

Allow grass to dry before mowing.

Slow ground speed of tractor but keep 

engine running at full PTO rpm.

Cutting lower will help.