Alamo Exten-A-Kut II Benutzerhandbuch
OPERATION
EK II 03/09
Operation Section 3-40
©2009 Alamo Group Inc.
OPERA
T
ION
Streaking Conditions
Conditions too wet for
Allow grass to dry
cutting.before cutting.
Slow
ground speed of
tractor but keep
engine running at full
PTO rpm. Cutting
lower may help.
ground speed of
tractor but keep
engine running at full
PTO rpm. Cutting
lower may help.
Dull blades.
Sharpen or replace
blades.
blades.
Height of cutter lower at
See Cutting Height
rear or front.
Instructions.
Blade Bolts
Bolts not tightened.
Tighten bolts to
350 ft.lbs.
350 ft.lbs.
Bolt hole elongated or
Replace Bushing or
oversized.
Blade Carrier.
Locknut worn out.
Replace Locknut.
Blades Wears Too Fast
Cutting in sandy conditions. Increase cutting height.
Cutting in rocky conditions.
Cutting in rocky conditions.
Increase cutting height.