Dixon 30 KOH/968999591 Benutzerhandbuch
English
-
51
MAINTENANCE
Blade replacement
WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
•
Remove blade bolt by turning counterclockwise.
IMPORTANT INFORMATION
To ensure proper assembly, center hole
in blade must align with star on cutter
housing.
in blade must align with star on cutter
housing.
•
Install new or re-sharpened blade with stamped
“GRASS SIDE” facing towards ground/grass
(down) or “THIS SIDE UP” facing deck and cutter
housing.
“GRASS SIDE” facing towards ground/grass
(down) or “THIS SIDE UP” facing deck and cutter
housing.
•
Install and tighten blade bolt securely.
•
Torque blade bolt to 45-55 ft/lbs (60-75 Nm).
IMPORTANT INFORMATION
Special blade bolt is heat treated.
Replace with a Dixon bolt if required.
Do not use lower grade hardware than
specifi ed.
specifi ed.
1. Blade
2. Debris shield
3. Blade bolt (special)
4. Cutter housing
Blade attachment
Blade attachment
1
2
3
4