Troy-Bilt 769-08234 Benutzerhandbuch

NOTE: This Operator’s Manual covers several models. Snow 

thrower features may vary by model. Not all features in this 

manual are applicable to all snow thrower models and the snow 

thrower depicted may differ from yours.

See the Engine Operator’s Manual for the location and function 

of the controls on the engine.

When engaged, the auger rotation draws snow into the auger 

housing and throws it out the discharge chute. Rubber paddles 

on the auger also aid in propelling the snow thrower as they 

come in contact with the pavement.

Located on the upper handle, the auger control is used to 

engage and disengage drive to the auger. Squeeze the control 

against the upper handle to engage the auger; release it to 

disengage.

Rotate the discharge chute to the left or right using the chute 

handle. The pitch of the discharge chute controls the angle at 

which the snow is thrown. Loosen the wing knob on the side of 

the discharge chute before pivoting the discharge chute upward 

or downward. Retighten the knob once the desired position has 

been achieved.

Rotate the discharge chute to the left or right using the chute 

rotation control. The pitch of the discharge chute controls the 

angle at which the snow is thrown. Loosen the wing knob on the 

side of the discharge chute before pivoting the discharge chute 

upward or downward. Retighten the knob once the desired 

position has been achieved.

The shave plate maintains contact with the pavement as 

the snow thrower is propelled, allowing snow close to the 

pavement’s surface to be discharged.