Troy-Bilt Squall2100 Benutzerhandbuch

Refer to the Engine Operators manual packed separately with 

your snow thrower for maintenance and adjustment information 

on your engine.
1. 

To access the oil drain and spark plug on model 2T5 it is 

necessary to remove the lower panel.

2. 

Remove the three screws that secure the lower panel. 

Remove the lower panel by lifting up on the panel to free 

the tabs at the bottom of the panel from the tab slots and 

then pull back. See Fig. 6-3.

NOTE: The bottom of the panel has tabs that help hold it in 

place.
NOTE: An oil drain extension kit is available separately. 

Contact your local Troy-Bilt dealer or contact Troy-Bilt’s 

Customer Support for kit #753-06684.

3. 

Change the oil and/or the spark plug as instructed in your 

Engine Operator’s manual.

4. 

Re-install the lower panel by placing the tabs in the tab 

slots, lifting the panel into place and secure with the three 

screws removed in step 2.

5. 

Tip the snow thrower back to the operating position and pull 

the starter handle a few times to see if it is difficult to pull.

6. 

If the starter is difficult to pull, remove the spark plug and 

pull the handle several times to ensure that any oil trapped 

in the head is removed. 

Oil may come out of the spark plug hole 

when it is removed and the starter handle is pulled.

7. 

Inspect the spark plug. If it is wet, clean off any oil before 

re-installing.