Radio Shack 32-1230A Benutzerhandbuch

6

2. Set the transmitter switch to the desired channel. Do 

not handle the printed circuit board or remove the 
protective shield.

3. Replace the lower section of the microphone body.

1. Fully extend the receiver’s antenna.

2. Turn on your amplifier, tape recorder, mixing board, 

and other necessary components of your audio 
system. Set the volume control (or input level controls) 
to moderate settings.

3. Set the receiver’s volume control to its minimum 

setting.

4. Press the receiver’s power button to the on position. 

The green power indicator lights.

5. Set the receiver channel switch to the same channel 

as the transmitter.

6. Set the microphone’s 

 switch to 

. The 

receiver’s red READY indicator lights.

7. Begin talking into the microphone and adjust the 

receiver’s volume control to the desired level.