Radio Shack 32-1230A Benutzerhandbuch

Seite von 9
7
Note: Experiment with the receiver’s volume setting and 
the settings of other components in your audio system to 
obtain the best results.
Using the Standby Setting
The microphone’s 
STBY
 setting lets you turn off the 
microphone without turning off the microphone’s 
transmitter.
If you move the switch from 
ON
 or 
STBY
 to 
OFF
 while your 
amplifier is on, there is a loud pop. There is no pop when 
you move the switch from
 STBY
 to 
ON
, or from 
ON
 to 
STBY
.
To conserve battery power, be sure to set the switch to 
OFF
 
when you finish using the microphone.
SPECIFICATIONS
S
ensitivity ......................................................100 dB SPL @ ± 7 kHz FM
Frequency Response .................................................... 100 – 10,000 Hz
RF Output Power ............................................................... 50 mW (Max)
Current Consumption ....................................................30 mA (Average)
Battery Life (Alkaline) ..................................................8 Hours (Average)
Dimensions (Diameter 
×
 Length) ............................... 2
3
/
8
 
×
 9
11
/
16
 Inches
(61 
×
 246 mm)
Operating Frequencies
Channel ........................................................................ Frequency (MHz)
A.................................................................................................. 169.445
B.................................................................................................. 169.505
C.................................................................................................. 170.245
D.................................................................................................. 170.305