Zoom MRS-1044 Benutzerhandbuch

For details on the procedure, refer to the sections that

follow.

In the case of an operation that you execute, you will

automatically return to the main screen after execution.

You can select a project that was saved on the hard disk,

and load it. When the following screen is displayed, use the

dial to select the project that you want to load.

Press the [ENTER] key to load the project, or press the

[EXIT] key to cancel. After the project has been loaded,

you will return to the main screen.

• When you press the [ENTER] key, the project that you

had been working on will be saved automatically before

the selected project is loaded.

• When the power of the MRS-1044 is turned on, the

project that you were last working on will be loaded

automatically.

This operation creates a new project. To execute, press the

[ENTER] key when the following screen is displayed. To

cancel, press the [EXIT] key.

When you press the [ENTER] key, a new project will be

loaded, and you will return to the main screen.

• A newly created project will be automatically assigned a

default name of "PRJxxx" (xxx will be a project number in

the range of 000 – 999). You can edit this name as

desired.

• When you press the [ENTER] key, the project that you

had been working on will be saved automatically before

the new project is created.

This displays the size of the currently loaded project, the

available capacity of the internal hard disk, and the

remaining recording time. Use the cursor [

Q

]/[

W

] keys to

switch between the following display items.

●

REMAIN MB: This shows the remaining space on the

internal hard disk in MB (megabyte) units. (One

megabyte is 1,048,576 bytes.)

●

REMAIN h/m: The approximate recordable time

remaining for each track is shown in hours (h) / minutes

(m) / seconds.

●

PRJ SIZ MB: This shows the size of the currently

loaded project in MB (megabyte) units.

●

PRJ SIZ h/m: This shows the size of the currently

loaded project in terms of the recorded time per track, in

hours (h) and minutes (m).

Number of the project 

that will be newly created

Project name

Project number